扎格罗斯前陆盆地晚中新世快速剥露证据——来自磷灰石(U- Th)/He的约束     

李佳纬  孙继敏  吕丽星  张志亮  田晟辰  曹萌萌  李有生  苏柏 《地质学报》2020,94(12):3674-3688

伊朗扎格罗斯造山带是世界上最年轻的造山带之一，前人对其构造演化历史的研究尚存争议。前陆盆地蕴藏着丰富的造山带热史信息，为研究造山带的隆升和剥露历史提供了重要途径。本研究选取位于扎格罗斯前陆盆地前缘中部的Kuh- E Bedush向斜和Kuh- E Murdeh向斜翼部出露的第三纪陆相红层(Agha Jari组)为研究对象，共采集11个粗砂岩样品进行磷灰石(U- Th)/He测试分析。11个样品共得到38个单颗粒年龄，年龄区间为0. 8~79. 9Ma。大部分样品的单颗粒年龄比较分散，表明这些样品没有发生完全热重置。相反，位于Murdeh向斜剖面最底部的样品，(U- Th)/He年龄小于其对应的地层年龄，并且集中分布在8. 3~6. 8Ma，表明该样品发生了完全重置并记录了最后一次剥露事件的时间。因此，我们认为扎格罗斯前陆盆地于晚中新世~7. 5 Ma经历了一期快速剥露事件。此外，我们发现未重置的(U- Th)/He年龄大致分布在四个时间段：晚白垩纪—早古新世、早—中始新世、渐新世、早—中中新世。根据所得热年龄并结合前人研究设定了三种不同的热史，正演模拟结果与实际样品拟合较好，由此推断出前陆中部Agha Jari陆相红层沉积物可能来自于：①晚白垩世以来以蛇绿岩套为主的仰冲体持续剥露；②萨南达季- 锡尔詹变质带(SSZ)渐新世和中新世逐渐加速的剥露；③渐新世末堆积在仰冲体之上的同造山期砾岩，在中新世的大规模逆冲作用下重新剥露。  相似文献   

Crack nucleation in saturated porous media     

Luc Dormieux  Eric Lemarchand  Thomas Carlioz  Laurent Jeannin 《国际地质力学数值与分析法杂志》2020,44(5):553-574

Crack nucleation has been the subject of important contributions in the last two last decades. However, it seems that few attention has been granted to the case of saturated porous media. This is the question addressed in the present paper which is devoted to nucleation in traction mode. From a physical point of view, nucleation is a sudden phenomenon, so that the material response is both adiabatic and undrained. In the spirit of the variational approach, the nucleated crack is viewed as the final state of a region of space in which the material undergoes a full damage process. In traction mode, the opening of a saturated crack in undrained condition induces a drop of fluid pressure. In case of low fluid compressibility, the presence of the fluid delays the brittle failure usually associated with nucleation, as long as the fluid pressure remains above the saturation vapor pressure. Nucleation is therefore possible only if a partial vaporization of the fluid takes place.  相似文献   

桂西北林旺金矿床构造控矿规律及成矿模式探讨     

张知春 《地质与勘探》2020,56(2):277-287

桂西北林旺金矿是近年来右江盆地新发现的卡林型金矿,位于乐业碳酸盐台地边缘乐业-浪全同生断裂带上。通过对矿区进行野外调查、岩矿鉴定并结合勘探成果进行综合研究,发现I号矿体群与断裂、褶皱的时空联系具有构造分带的特征,以F1断层为界,上盘褶皱鞍部发育石英杂砂岩夹粉砂质泥岩矿体,矿体近F1断层破碎带部位发育破碎的硅化构造岩带,F1下盘近破碎带部位发育强烈劈理化、炭化粉砂质泥岩带,指示矿区在印支期挤压过程中,石英杂砂岩顺着先存构造薄弱面以泥岩层为滑动系统,往上部逆冲并逐渐发生褶皱,产生许多张裂隙,成为成矿流体富集的场所。林旺金矿床是层滑-褶皱构造体系与成矿流体耦合作用的产物,分析了矿床构造成矿规律,提出了以层滑-褶皱运动机制为基础的成矿模式以及成矿远景。  相似文献   

水资源约束下的河西走廊城市经济脆弱性时空演变及其影响因素     

张戬  陈佳  黄馨  王子侨 《中国沙漠》2019,39(1):203-211

城市经济脆弱性作为当前脆弱性研究中的重要领域，为人-地系统耦合研究提供了新的视角，并为城市可持续健康发展提供有益的决策支持和管理方法。依据城市经济脆弱性内涵，基于暴露度、敏感性、适应能力构建了城市经济脆弱性评价指标体系，运用熵权TOPSIS法评价河西走廊地区及区域内五市的城市经济脆弱性，并采用障碍度模型识别影响区域城市经济脆弱性变化的因素。结果显示：（1）2006—2015年，河西走廊地区城市经济脆弱性呈现出先曲折下降（2006—2011年）再波动上升趋势（2012—2015年）；（2）河西走廊地区的城市经济脆弱性具有明显的空间特征，经历了东西高、中部低到整体较高的演变过程；（3）阻碍河西走廊地区城市经济脆弱性降低的障碍因子由适应能力逐步转变为暴露度。针对河西走廊地区各市主要障碍因子，提出针对性优化措施。  相似文献   

辽宁沿海地区海洋经济增长质量空间特征及影响要素     

李博  田闯  史钊源  韩增林 《地理科学进展》2019,38(7):1080-1092

在海洋经济质量转型之期,基于“认知—评价—建构—优化”理念,界定海洋经济增长质量内涵,通过中心-引力模型评价分析2000—2014年辽宁沿海地区海洋经济增长质量空间特征,构建了海洋经济增长质量模型,识别影响其空间特征的相关要素,并根据要素作用程度提出优化建议。研究发现：① 辽宁沿海地区海洋经济增长质量呈“核心—圈层”结构,形成以大连为“领头雁”的雁阵式相互继起模式;“钻石型”引力流结构促成辽宁沿海地区集中化连片发展格局;② 海洋经济增长质量空间特征主要受空间集聚效应影响,海洋资本、海洋基建和海洋产业结构成为推动海洋经济增长质量循环引力流的顺流机制,其中海洋产业结构成为影响辽宁海洋经济增长质量圈层空间集聚效应的关键流;海洋人才成为制约海洋经济增长质量循环引力流的逆流机制;③ 通过路径作用程度的象限划分,提出强化大连中心地职能,针对腹地城市定位及资源禀赋条件提出调控措施,推进沿海区域协调与一体化进程。  相似文献   

Analog simulation of urban construction land supply and demand in Chang-Zhu-Tan Urban Agglomeration based on land intensive use     

Xiong  Ying  Chen  Yun  Peng  Fen  Li  Jingzhi  Yan  Xiaojing 《地理学报(英文版)》2019,29(8):1346-1362

Journal of Geographical Sciences - Urban land intensive use is an important indicator in harmonizing the relationship between land supply and demand. The system dynamics (SD) can be used to...  相似文献   

不同空间尺度的山洪灾害风险评价模型对比研究          下载免费PDF全文

田丰  张军  冉有华  刘金鹏  周翼 《干旱区地理》2019,42(3):559-569

以山洪灾害风险评价的多准则决策模型、最大熵模型、信息量模型三种常见模型为研究对象，选取河西走廊和张掖市为地理区划（大中）、市域（小）空间尺度研究区，构建山洪灾害风险评价指标体系，分别完成基于三种模型的两种空间尺度的山洪灾害风险评价制图，基于甘肃省地质灾害调查与区划报告数据从模型验证、空间自相关、精度对比和尺度效应等角度对比分析三个模型应用于不同空间尺度的适应性，并给出优选模型。结果表明：最大熵模型是河西走廊（地理区划）空间尺度上山洪灾害风险评价的优选模型；多准则决策模型不适用于张掖市（市域）空间尺度评价，且三个模型运行结果均没有河西走廊（地理区划）空间尺度上表现良好；三个模型的尺度效应明显，在地理区划空间尺度上应用较良好，缩小至市域空间尺度上模拟结果误差增大；不同空间尺度上，最大熵模型均优于多准则决策模型和信息量模型，适用于地理区划（大中）、市域（小）空间尺度的山洪灾害风险评价。  相似文献   

Strain analysis of a seismically imaged mass‐transport complex,offshore Uruguay     

Michael J. Steventon  Christopher A.‐L. Jackson  David M. Hodgson  Howard D. Johnson 《Basin Research》2019,31(3):600-620

Strain style, magnitude and distribution within mass‐transport complexes (MTCs) are important for understanding the process evolution of submarine mass flows and for estimating their runout distances. Structural restoration and quantification of strain in gravitationally driven passive margins have been shown to approximately balance between updip extensional and downdip contractional domains; such an exercise has not yet been attempted for MTCs. We here interpret and structurally restore a shallowly buried (c. 1,500 mbsf) and well‐imaged MTC, offshore Uruguay using a high‐resolution (12.5 m vertical and 15 × 12.5 m horizontal resolution) three‐dimensional seismic‐reflection survey. This allows us to characterise and quantify vertical and lateral strain distribution within the deposit. Detailed seismic mapping and attribute analysis shows that the MTC is characterised by a complicated array of kinematic indicators, which vary spatially in style and concentration. Seismic‐attribute extractions reveal several previously undocumented fabrics preserved in the MTC, including internal shearing in the form of sub‐orthogonal shear zones, and fold‐thrust systems within the basal shear zone beneath rafted‐blocks. These features suggest multiple transport directions and phases of flow during emplacement. The MTC is characterised by a broadly tripartite strain distribution, with extensional (e.g. normal faults), translational and contractional (e.g. folds and thrusts) domains, along with a radial frontally emergent zone. We also show how strain is preferentially concentrated around intra‐MTC rafted‐blocks due to their kinematic interactions with the underlying basal shear zone. Overall, and even when volume loss within the frontally emergent zone is included, a strain difference between extension (1.6–1.9 km) and contraction (6.7–7.3 km) is calculated. We attribute this to a combination of distributed, sub‐seismic, ‘cryptic’ strain, likely related to de‐watering, grain‐scale deformation and related changes in bulk sediment volume. This work has implications for assessing MTCs strain distribution and provides a practical approach for evaluating structural interpretations within such deposits.  相似文献   

基于STIRPAT模型的内蒙古沙漠化地区环境压力分析     

樊胜岳  刘文文  周宁 《中国沙漠》2019,39(3):117-125

实现经济与生态环境的协调发展，已经成为当前治理沙漠化的巨大挑战。如何定量分析人类活动和自然条件对环境的影响，是当前环境经济学界研究的热点问题。以内蒙古自治区71个沙漠化县为研究对象，以1986—2010年为研究区间做面板空间计量实证分析。选取了人口、富裕度、技术水平、风速和降水作为环境基础指标构建STIRPAT模型，从环境压力内在驱动角度定量分析不同的自然因素和人为因素对沙漠化地区环境的综合影响。结果表明：在观测数据范围内，富裕度、技术水平、风速和降水是内蒙古自治区环境压力的主要驱动因素；富裕度每增加1%，环境压力显著增加0.096%；技术水平每变化1%，将引起环境压力相应发生0.084%的变化；风速和降水每变动1%分别使得沙漠地区环境压力显著地增加0.640%和减少0.216%。  相似文献   

Fully coupled hydraulic fracture simulation using the improved element partition method     

Shujun Peng  Zhennan Zhang  Jianye Mou  Bing Zhao  Zhiyuan Liu  Jiading Wang 《国际地质力学数值与分析法杂志》2019,43(1):441-460

The improved element partition method (IEPM) is a newly developed fracture simulation approach. IEPM allows a fracture to run across an element without introducing extra degrees of freedom. It can also simulate any number of fractures in a prescribed mesh without remeshing. In this study, the IEPM is extended to hydraulic fracture simulation. First, the seepage and volumetric storage matrix of a cracked element are derived using virtual nodes (the intersection points of a crack with element edges). Subsequently, the fully coupled hydromechanical equation is derived for this cracked element. To eliminate the extra degrees of freedom (virtual nodal quantities), the water pressure and displacement of the virtual nodes are associated with their adjacent nodes through least squares interpolation. Finally, the fully coupled equation in terms of nodal quantities is obtained. The verification cases validate the method. By using this method, the field-scale hydraulic fracturing process is well simulated. The proposed approach is simple and efficient for field-scale hydraulic fracture simulation.  相似文献